INDUSTRIAL-XL SYSTEM

INDUSTRIAL-XL SYSTEM

The three ballast units comprising the Industrial-XL system are designed to provide large photovoltaic panels with a solid, secure, and durable support. The structures are made of concrete with a strength class of C32/40, allowing modules to be fastened at four points along the long side of the frame. This maximizes the potential of “half-cut” panels, optimizing the performance of the PV system. The 5° inclined lattice structure enables all ballasts to be connected into a single collaborative network, offering high wind resistance even for the largest panels and perfectly balancing the loads on the roof. The Industrial-XL ballast system comes with M8 fixing inserts and an extra-reinforcement metal bar integrated into each unit.

Art. 23005.XLF

Art. 23005.XLF

Art. Art. 23005.XLC

Art. Art. 23005.XLC

Art. 23005.XLT

Art. 23005.XLT

Application

Any type of flat roof with a maximum slope of 5 º; on the ground, on beaten ground with inert material or pavements

Module inclination
Quantity per pallet
12
Ballast weight
45 Kg
Pallet dimensions
140 cm x 108 cm, h= 32,5 cm
Distance between panels
Variable
Total pallet weight
566 Kg
Orientation of the PV module
Vertical
PV panel size
Large panels 2000x1100cm or similar.
Application

Any type of flat roof with a maximum slope of 5 º; on the ground, on beaten ground with inert material or pavements

Module inclination
Quantity per pallet
10
Ballast weight
55 Kg
Pallet dimensions
164,3 cm x 66,5 cm, h= 63,5 cm
Distance between panels
Variable
Total pallet weight
564 Kg
Orientation of the PV module
Vertical
PV panel size
Large panels 2000x1100cm or similar.
Application

Any type of flat roof with a maximum slope of 5 º; on the ground, on beaten ground with inert material or pavements

Module inclination
Quantity per pallet
12
Ballast weight
45 Kg
Pallet dimensions
121 cm x 76,8 cm, h= 63,5 cm
Distance between panels
Variable
Total pallet weight
566 Kg
Orientation of the PV module
Vertical
PV panel size
Large panels 2000x1100cm or similar.
CONTACT US TO FIND OUT MORE
Document Thambnail

Download Technical Sheet

0.48 Mb

ASSEMBLY HAS NEVER BEEN SO EASY!

With Sun Ballast Industrial-XL system, the company takes a further step forward in the direction of the corporate mission: to contribute to the reduction of renewable energy costs in order to achieve self-sufficiency.
In fact, this system simplifies and facilitates the installation of the photovoltaic system on flat roofs. The ballasts are equipped with a tooth that hold the module, preventing its release and improving its tightness. The distance between the rows is given by the module size, therefore, by squaring the first row, the rest comes by itself, easier and faster than ever.

The results for those who choose to use the new Sun Ballast- Industrial-XL system are concrete and tangible. From a technical point of view, there is an improvement in wind resistance with a lower roof load (kg / m2).
In economic terms, there is a real reduction in purchase, transport and installation times.

Can I have the details about the pallets?

Of course, please send an email to logistica@sunballast.com including the reference number of your order.

Is it possible to ground your system?

Yes, it can be grounded by means of connecting 2 panels as explained in the execution standard or using accessories (e.g. terminal and central braces) certified for grounding.

How long is your buckle?

Our buckle has a screw thread ≈ 3 cm long.

Can I install rails on your ballasts?

Yes.

Can I install solar thermal panels on your ballasts?

Yes, the technicians will suggest you the best solution after receiving the technical sheet and the assembly instructions of the panel.

Can I install the panels glass-glass?

Yes, by using the rails.

Is it possible to have a ballast produced according to our dimensional requirements?

Yes it is, we also produce custom ballasts to meet our clients’ needs.

Can I have black ballasts?

Yes, the minimum order is 1 pallet.

How long does the shipment take?

As soon as we receive the complete order (i.e. signed order, with delivery address + bank transfer report) we set shipment and delivery in 2/3 working days for northern Italy, 3/4 working days for central Italy, 4/5 working days for southern Italy/islands, 5/6 working days abroad.

Please note: for orders over €1500 we also have to wait for the credit to be transferred on our bank account.

Can you deliver the material on a vehicle with tail lift, as we do not have the equipment to unload the pallets?

Of course, we can send you a vehicle with hydraulic tail to unload the pallets.

Please note: we can do it up to 15/20 pallets; for larger amounts we supply a semi-truck, which is not provided with hydraulic tail.

Is there iron in the ballast?

Yes, in our ballasts there are 1-2 iron bars that enhance the resistance in handling and transport; should our ballast be damaged during the shipment (i.e. minute cracks occurring in the surface), it can be used anyway.

Is the buckle in the ballast in stainless steel?

No, it is made of zinc plated steel, as it permits to redo the thread if it strips while screwing (using the male screw M8)

Is it possible to drill the ballast?

Yes, our ballast can be drilled to insert Ø 9 mm expansion buckles. We recommend you to drill the ballasts in the central part.

What can I do if the buckle is oxydised?

Apply lubricant (e.g. WD40) or grease on the buckle.

Can I install the ballasts on any kind of flat surface?

Yes, our ballast can be installed on gravel, green roof, tarmac, concrete, ground.

What is the maximum tilt of the roof on which your system can be installed?

It can be installed on any roof with a maximum tilt of +5° or -5°.

Icon quotation

Request now a

Custom Quote

Ask a quotation!
Icon support

You need

Technical assistance?

CONTACT US NOW
Loader Gif
Loader Gif
Loader Gif